Inventory week 51 then Christmas holidays from 20 December to 05 January

  • 50 years of experience

    We have been specialising in stainless steel cables and accessories since 1958. We provide our expertise in the field and our advice to help you realise your custom-made projects.

Ropes terminals

Revolutionary system to finally create technical rope rigging.

Start by making your backstays, and then see about the rest.

Your railings will also be much lighter and just as reliable as with stainless steel cable.

Ropeline range

Showing 1 - 20 of 20 items
  • 55,17 € TTC

    Eye / swivel for rope, in High Strength Aluminium, polished and “asphalt” anodized. Allows you to make a forestay (for example) without casuing a twist in the rope during assembly / tensioning. The small "wheel" inside the part is free to rotate around the rope axis. Can be used with all types of ropes, but especially designed to give maximum performance...

    From 55,17 € TTC
  • 68,39 € TTC

    Fork end for rope, in anodized "asphalt" ALUMINIUM. Use to make a shroud (for example) without causing a twist in the rope during assembly / tensioning. The small "wheel" inside the part is free to rotate around the rope axis. Can be used with all types of ropes, but especially designed to give maximum performance to aDyneema. Approved by Gleistein...

    From 68,39 € TTC
  • 8,82 € TTC

    Often used in races, these stainless steel T-Bones (or DOG-BONES) allow to quickly tie all kinds of halyards, sheets, etc. Quick to fit, ultra fast to remove, very lightweight. Also allows for quick release in case of need or emergency. Made of Aluminium ROPELINE RANGE

    From 8,82 € TTC
  • 24,65 € TTC

    Crimp terminal on one end, large UNF threaded eye on the other Standard boating range, removable system. For use on ropes, trapeze ends, light sail stays, railings, etc. Aisi316 stainless steel (Marine) - Guaranteed mechanical strength. ROPELINE RANGE

    From 24,65 € TTC
  • 11,43 € TTC

    Cast 316 stainless steel cleat to secure your mooring lines. No sharp edges on this very 'Design' model. fastened with 4 countersunk head screws. Available in 100 / 150 / 200 / 250 lengths.

    From 11,43 € TTC
  • 10,73 € TTC

    Cast 316 stainless steel cleat to secure your mooring lines. There are no sharp edges on this classically shaped model. fastened with 2 countersunk head screws. Available in 100 / 150 / 200 / 250 lengths.

    From 10,73 € TTC
  • 10,77 € TTC

    Forged eye on one end and "T" on the other. usually used with the anchor plate adapted to its diameter. Allows the creation of rope shrouds to replace existing cables. Boating range. Made of Aisi316 stainless steel (Marine). ROPELINE RANGE

    From 10,77 € TTC
  • 10,12 € TTC

    Friction ring made of 6061 aluminium, black hard anodized finish. Very Strong, they are used in for heavy loads and / or small movements. The parabolic shape of the cable circulation allows good rope sliding and considerably limits its wear. Uses: Masthead, lazy jack, cascade hoists, loop, thimble, backstay, barberhauler, ... ROPELINE RANGE

    From 10,12 € TTC
  • 14,09 € TTC

    Reinforced stainless steel thimble for specific use and splicing with technical ropes. 316 Grade stainless steel

    From 14,09 € TTC
  • 59,47 € TTC

    Fork for rope, in AISI316 stainless steel (Marine) - built-in swivel function. Use to make a shroud (for example) without causing a twist in the rope during assembly / tensioning. The small "wheel" inside the part is free to rotate around the rope axis. Can be used with all types of ropes, but especially designed to give maximum performance to a Dyneema....

    From 59,47 € TTC
  • 57,59 € TTC

    1/2 ball rope terminal in AISI316 stainless steel (Marine) - built-in swivel function. Used to make a cap shroud (for example) without causing a twist on the rope during assembly / tensioning. The small "wheel" inside the part is free to rotate around the rope axis. Can be used with all types of ropes, but especially designed to give maximum performance...

    From 57,59 € TTC
  • 47,97 € TTC

    Eye / swivel for rope, in AISI316 stainless steel (Marine). Allows you to make a forestay (for example) without causing a twist in the rope during assembly / tensioning. The small "wheel" inside the part is free to rotate around the rope axis. Can be used with all types of ropes, but especially designed to give maximum performance to aDyneema. Approved by...

    From 47,97 € TTC
  • 10,63 € TTC

    These 316L stainless steel sheaves are a clever way to convert / adapt a fork turnbuckle into a rope fork turnbuckle! The splicing of the rope will be much stronger. ROPELINE RANGE

    From 10,63 € TTC
  • 7,70 € TTC

    Often used in races, these stainless steel T-Bones (or DOG-BONES) allow to quickly tie all kinds of halyards, sheets, etc. Quick to fit, ultra fast to remove, very lightweight. Also allows for quick release in case of need or emergency. Marine grade stainless steel (aisi316L) ROPELINE RANGE

    From 7,70 € TTC
  • 62,37 € TTC

    Rope tee, in AISI316 stainless steel (Marine) - built-in swivel function. Used to to make a cap shroud (for example) without creating a twist on the rope during assembly / tensioning. Can be used with all types of ropes, but especially designed to give maximum performance to aDyneema. Approved by Gleistein Ropes. Ø4 to 8mm rope. ROPELINE RANGE

    From 62,37 € TTC
  • 14,90 € TTC

    Welded fork end at 1 end and "T" end at the other. usually used with the anchor plate adapted to its diameter. Standard boating range. Made of Aisi316 stainless steel (Marine). ROPELINE RANGE

    From 14,90 € TTC
  • 17,26 € TTC

    Large eye on one end and "T" on the other. usually used with theanchor plateadapted to its diameter. used to make rope shrouds to replace an existing cable. Standard boating range. Made of Aisi316 stainless steel (Marine). ROPELINE RANGE

    From 17,26 € TTC
  • 7,84 € TTC

    UNF threaded eye for mounting on rope splice. Standard boating range. Aisi316 stainless steel (Marine) - Guaranteed mechanical strength. ROPELINE RANGE

    From 7,84 € TTC
  • 51,80 € TTC

    UNF threaded end for rope(Right pitch only)AISI316 stainless steel (Marine) - built-in swivel function. Use to make a shroud (for example) without causing a twist in the rope during assembly / tensioning. The small "wheel" inside the part is free to rotate around the rope axis. Can be used with all types of ropes, but especially designed to give maximum...

    From 51,80 € TTC
  • 58,72 € TTC

    Threaded end for rope(Right pitch only)AISI316 stainless steel (Marine) - built-in swivel function. Allows for technical roping without creating a twist in the rope during assembly / tensioning. Can be used with all types of ropes, but especially designed to give maximum performance to aDyneema. This version is specially developed for cuts. Approved by...

    From 58,72 € TTC
Showing 1 - 20 of 20 items
secure payment
Fast delivery
with tracking number
Quality service
  • 15 days, satisfied or refunded.
  • Our partners respect
    European standards and certifications
    .
  • Free customer service.
Need advice ? Contact-us