The company will be closed from the evening of 22 December to 03 January inclusive. Happy holidays!
We have been specialising in stainless steel cables and accessories since 1958. We provide our expertise in the field and our advice to help you realise your custom-made projects.
Backstay triangle plate, electro-polished finish. Made of 316L stainless steel, 2 shafts + 1 shaft. To create a crow's foot attachment for your backstay without modifying the masthead. larger size on request
Fixing kit for pontoon defense (bumper) including a T-bolt, a NYLSTOP nut and an extra large washer.Fixing to be slipped into the rail of the pontoon.Depending on the length of the bumper, several kits will be necessary.
Cast 316 grade stainless steel anchoring hasp (fastened using 2 screws or 2 rivets). Ideal for rope guides.
Anchoring shell, needed to fix shrouds with half-ball terminals at the top of your mast. Make an opening 1mm larger than the L1 / L2 shell dimensions. Parts made in cast 316 stainless steel (Marine).
Crossed fairlead, in cast 316 stainless steel No sharp edges on this very aesthetic model. fastened with 3 countersunk screws, available in length 115 or 150. Crossed Right = reference "_D" / Crossed Left = reference "_G" (Photo = crossed Left)
Cup for half-ball tip positioning in the shell provided to receive it. Used for shroud attachments on masts and hollow tubes
Flat pressed 316 grade stainless steel hasp for anchoring, halyard lead-through, etc. fastened using 2 screws or 2 rivets. Cheap and solid.
Cast 316 stainless steel cleat to secure your mooring lines. No sharp edges on this very 'Design' model. fastened with 4 countersunk head screws. Available in 100 / 150 / 200 / 250 lengths.
Cast 316 stainless steel cleat to secure your mooring lines. There are no sharp edges on this classically shaped model. fastened with 2 countersunk head screws. Available in 100 / 150 / 200 / 250 lengths.
Flat pressed and folded 316 stainless steel hasp, for anchoring, halyard leads, etc. fastened with 1 screw or 1 rivet. Cheap and solid.
Forged 316 stainless steel hasp for the passage of straps (fixed by 2 screws or 2 rivets). Allows, for example, to organise the boat deck plan.
Large diameter eye welded to a threaded rod, for anchoring in a wall, on a patio, on a boat deck, ... Welded flange for good bearing capacity. 316 grade marine stainless steel for use in all environments.
Rod with a right metric thread and a left metric thread part (used to reverse the thread direction at the end of a turnbuckle) Double thread. 316 stainless steel
Right tapped pelican hook (M6 or M8) for mounting onthreaded end. For passage (door) closing/opening in your boat railings. 316 grade stainless steel
Pelican hook with metric or UNF thread for mounting onthreaded end. For passage (door) closing/opening in your boat railings. 316L stainless steel, high quality product.
Allows to obstruct the oblong void above the "T".Thus, in no case, the "T" will risk to come out of the anchor plate housing (in case of damage for example)To be associated with the following parts:- Anchor plate- "T" terminal
Dome with right threading for assembly on threaded tips or turnbuckle bodies. Ideal and aesthetic for guardrail cables. Marine stainless steel (Aisi 316). Allen key imprint.
UNF threaded rod with a right pitch and a left pitch . (used to reverse the thread direction at the end of a turnbuckle). Drill holes for safety pins included. 316L stainless steel
Stainless steel, metric "right threaded” threaded rod, lengths suitable for use with our turnbuckles. Also available in 1 meter bars. (316 grade “Marine” stainless steel, specific lengths on request)