As a result of the high level of activity, order preparation times have been extended.
EN
FR
EN
We have been specialising in stainless steel cables and accessories since 1958. We provide our expertise in the field and our advice to help you realise your custom-made projects.
Chemical anchor (316 stainless steel threaded rod + cartridge). Use in solid concrete only. ØD = Drilling diameter.
Crimp termination on one end, LONG threaded body, UNF straight thread on the other. Part designed for nautical use, but without drilling for safety pin. Stainless steel aisi316 (Marine) - Mechanical resistance guaranteed. Available on order
Stamped shackle, in 316 grade stainless steel bar, straight shape with "quick locking" type shackle pin. Cheap and solid.
Stamped shackle in stainless steel bar, lyre-shaped with screw shackle pin and drilled shaft for a broken ring or safety pin. Cheap and solid.
Mini turnbuckle (tensioner) with closed body, equipped with a threaded rod and a crimped terminal. A sleek “Design” assembly for a discrete look. Main application: guardrail filling, stainless steel cables for interior decoration, etc. New cheaper "INOX SYSTEM" range.
Fixed welded fork with UNF threaded end, right pitch, end drilled for safety pin. Standard Marine range - 316 stainless steel Certified mechanical strength.
Crimp terminal on one side and fixed fork on the other. Designed according to the MS20667 standard for aeronautical applications, such as flight controls. Made of 316L stainless steel only.
A4 stainless steel screws with hexagonal head (HM), full thread, right pitch. Meets ISO 4017. Sold in packs of 10.
Stamped straight shackle, 316 grade flat stainless steel, screwed shaft. Cheap and solid.
Terminal swageless cable on one side, TE on the other. Allows the adaptation and the assembly at the end of your cable, on site, without other tools than wrenches. We developed this product on the same principle as the well-known NORSEMAN parts. Can be used with stainless steel cable '1x19' (for DYFORM or COMPACTED cable: on request). Ideal as a spare...
Stamped shackle, in flat 316 grade stainless steel, straight shape with bar (shaft in the middle of the shackle which crosses the bar) with shackle pin. Quick locking Cheap and solid.
Asymmetrical "fireman" carabiner with eye in 316 stainless steel. Fixing point for multiple applications: shade sails, trampoline nets, cables, ... NOT TO BE USED FOR LIFTING
Turnbuckle (or tensioner) open body in chrome-plated bronze, equipped with 2 fixed forks, including safety pins. UNF thread (special boating). Certified mechanical strength. Bronze combined with stainless steel minimizes the risk of seizure, ...
"Contact" washer Large size, in 316 stainless steel, NFE 25511. Its convex shape and the grooves on the support face of the nut have a good "brake" effect (anti-loosening). For screw sizes M5 to M10. - SOLD BY SETS OF 10 ONLY - (SET PRICE)
Half-ball tip with UNF thread,"LEFT pitch", including hole for safety pin. Standard boating range. Made of 316 stainless steel (Marine quality) - Guaranteed mechanical strength. (Possible accessories for rigging: shellandcup)
Special stainless steel assembly grease. When 2 stainless steel parts are screwed together, it is always strongly recommended to grease the threads before assembly. This is even more the case if the assembly is subjected to high loads. This will facilitate disassembly and will act as a barrier to dirt (salt). (read the instructions) Available in 50, 30 or...
Mini turnbuckle (tensioner), with a "sleek" design, discrete. Specially designed for applications such as decoration, guardrails, architecture, etc. Do not use for lifting. Guaranteed 316 stainless steel.
1/2 ball rope terminal in AISI316 stainless steel (Marine) - built-in swivel function. Used to make a cap shroud (for example) without causing a twist on the rope during assembly / tensioning. The small "wheel" inside the part is free to rotate around the rope axis. Can be used with all types of ropes, but especially designed to give maximum performance...
Specially designed for the installation of shade sails, this AISI316 (Marine) stainless steel set allows you to tension your shade sail, with the help of "strap" type bolt ropes. The breaking strength of this part is 1200 kg. A Ø8.5mm hole allows to fix a M8 fork tensioner (from Inox System). Dimensions: see technical data sheet
Protects sails from chafing and reduces snaggingEasy to clip on to railings (from 6 to 10 mm) external diameter 70mm
