boat rigging, guy lines, lifelines, catenary systems, etc.
Earth cable (cheaper than copper, even when using one size bigger diameter)
Ordering is easy :
Enter the required length in millimetres in the field under "from".
Just beneath, click "Save"
Go to the specifications table to select the cable and the quantity of that length you need and click the shopping cart.
Your cable is now in your cart, repeat the process if you want a different length cable.
INOX SYSTEM cable technical specifications :
Lower performance than the compact, but cheaper, the 1*19 single strand is the most frequently used cable for guy lines, rigging, shrouds and hangers.
With a smoother look than 7-strand cables, the 1*19 single strand cable is also used for guardrail assemblies without angles. (Strand deformation is permanent and reduces the breaking load)
Swaged terminal / Swageless terminal
When choosing the type of cable to use, the main data to consideration is:
. The breaking load . The elongation . Flexibility . The look
It is the study of this data that will determine the diameter, the cable type andaccessoryorterminalsizing.
Depending on the constraints and the assembly type, one of these specifications should be chosen as a priority:
For a guardrail type application, the breaking load is usually greater than necessary, it is therefore the capacity of the supports to take the load and the aesthetic look that will determine the cable cross section and type.
For industrial or marine applications, the breaking load (including the appropriate safety factor) and the elongation that will determine the cable type choice.
Strand:Set of stainless steel metal wires wound around a central wire.
Cable:A set of strands wound around a central metal core.
Tips when handling wire rope:
Avoid transporting the cable reel using your forklift truck as fork edges may damage it.
If you don’t want your cable to be altered by condensation during storage: Protect it using a canvas.
Make sure there are no works in the vicinity, as dust particles invisible to the naked eye may be deposited on the strands and oxidise them over time.
When your cable is wound into a reel, unwind it using a reel stand or a support shaft.
If the cable has been deformed during the winding process, it will need to return to its original shape after cutting.
Check frequently and if necessary passivate with the appropriate product.
Also avoid dragging the cable on the ground, as well as all contact with oxidisable steel and other types of materials.