316 stainless steel cable, 1x19 construction, white PVC coating, UV treated (linear use recommended - no severe angles)
Guaranteed mechanical strength
Use: sail boat railings, shrouds...
Ordering is easy :
Enter your 'cable length‘ in millimetres in the field just under "from --€ INCL VAT"
Click "Save" (just underneath)
Go to the specifications table below to select the cable and length you need and click the shopping cart.
Well done! Your cable is now in your cart, repeat the procedure if you want to add a different length cable.
INOX SYSTEM cable technical specifications :
The stainless steel cables single strand or flexible, are sheathed using hot extrusion. The sheath is attached to the outer strands.
The cable ends intended to be worked on, must have the coating stripped for the sleeve or terminal.
The most commonly used coating is white PVC, (railings, pool water line) but also POLYETHYLENE, for some industrial applications. Other colours are possible, subject to a sufficient length
When choosing the type of cable to use, the main data to consideration is:
. The breaking load . The elongation . Flexibility . The look
It is the study of this data that will determine the diameter, the cable type and accessory or terminal sizing.
Depending on the constraints and the assembly type, one of these specifications should be chosen as a priority:
For a guardrail type application, the breaking load is usually greater than necessary, it is therefore the capacity of the supports to take the load and the aesthetic look that will determine the cable cross section and type.
For industrial or marine applications, the breaking load (including the appropriate safety factor) and the elongation that will determine the cable type choice.
Strand: Set of stainless steel metal wires wound around a central wire.
Cable: A set of strands wound around a central metal core.
Tips when handling wire rope:
Avoid transporting the cable reel using your forklift truck as fork edges may damage it.
If you don’t want your cable to be altered by condensation during storage: Protect it using a canvas.
Make sure there are no works in the vicinity, as dust particles invisible to the naked eye may be deposited on the strands and oxidise them over time.
When your cable is wound into a reel, unwind it using a reel stand or a support shaft.
If the cable has been deformed during the winding process, it will need to return to its original shape after cutting.
Carry out frequent checks and possibly passivate using a suitable product.
Also avoid dragging the cable on the ground, as well as any contact with oxidisable steel and other materials.